Autowatch Ghost 2
Autowatch Ghost 2 is a groundbreaking car immobiliser that guards against key-long theft, cloning & relay theft. It is a discrete device that works quietly. A unique PIN code is required to be entered through the buttons on the steering wheel as well as the centre console.
It is completely undetectable by thieves using diagnostic tools since it doesn't emit radio signals. It is also convenient as it doesn't require a tracker, or any additional fobs.
Cost of installation
Ghost immobilisers is also referred to as a ghost alarm, is a subtle device that is integrated into the CAN data network of a vehicle. It doesn't require any additional LED indicators or fobs. It's virtually inaccessible to burglars, and it works on a completely different basis from regular car alarms. It prevents the vehicle from starting until a particular sequence of buttons are pressed by the owner. This ensures only the owner can drive the vehicle and reduce the chance of it being stolen.
Ghost immobilisers are less expensive than traditional devices and can be fitted in your vehicle in only a few hours by qualified technicians. They can be used on a variety of vehicles, which makes them a cost-effective method to improve the safety of your vehicle. You can even use ghost immobilisers with car tracking systems, providing an extra level of security for your vehicle.
Modern cars are easy to target for thieves with sophisticated technology that can duplicate remote keys, unlock the vehicle, and then take it away. This is why it is vital to secure your vehicle by installing a ghost immobiliser. It will stop the car from moving unless you press a unique sequence of buttons, providing you with peace of mind when handing your car to valet parking, or when hiring drivers.
The Autowatch Ghost 2 is a modern car security system that safeguards against the latest theft methods such as key copying. This tiny electrical device connects to your vehicle's CAN system and shuts off the engine after you enter a PIN code. It's a discrete, hidden device that is not affected by signal jamming or device spoofing. It also sends alerts to your phone if anyone attempts to tamper with your vehicle.
The Autowatch Ghost 2 immobiliser costs PS499 including VAT and can be fitted within a couple of hours at your office or home by one of our highly skilled TASSA (Autowatch) registered, DBS-security checked installers. It is a high-tech, low-maintenance device that is able to be easily moved from vehicle to vehicle and is compatible with most CAN-bus systems.
Cost of replacing keys
The Autowatch Ghost is a sophisticated piece of technology that offers the most advanced security against key cloning hacking, vehicle theft and key-cloning. It works without additional key fobs or LED indicators, as well as other devices. It can be fitted in most vans and cars in a few hours by our skilled technicians. The system can also be used in conjunction with car trackers to make it even more secure.
The system is connected to the CAN data network of your vehicle and therefore untraceable by thieves. It will not cause any diagnostic lights to come on since there aren't radio signals. The thief will not be able to access the OBD port of your vehicle either as it is directly linked to the ECU. This prevents them from acquiring new key fobs or replacing the ECU that would normally allow them to start the engine.
The ghost immobiliser is completely sealed and hidden inside the harness of the vehicle. This makes it nearly impossible for thieves to find. The system makes use of buttons already on the steering wheel and dash to generate a unique PIN code sequence that needs to be entered before the vehicle is able to begin. Monty's can also be programmed to operate in a Service/Valet option, which allows you to temporarily start the car without entering the PIN code. This is beneficial when you're transferring your vehicle to a mechanic, or valet parking service.
The CAN Ghost will stop the vehicle from moving if the PIN code is not entered. It could also stop the engine or the gearbox based on the requirements of your vehicle. It can be linked to a vehicle tracker, so you can track the position of your vehicle on a map with any device that is connected to the internet.
The system is incredibly easy to install and is able to be moved from vehicle to, making it a great alternative for classic and sports cars. It doesn't require batteries or power cables because it is connected to the CAN data network of your vehicle. It is almost undetectable and can be installed in a matter of hours by one of our TASSA certified, DBS security checked and certified technicians.
Cost of a replacement vehicle
Autowatch Ghost immobiliser is a cutting-edge technology that provides advanced protection against key cloning and hacking. It works by integrating directly with the vehicle's ECU and creating a security barrier that's nearly impossible to break without the correct PIN code. The system is also TASSA-certified and insurance-approved, making it a great choice for anyone looking to improve the security of their vehicle. It can also save you money on car insurance, as most insurance companies offer discounts for cars equipped with this system.
immobiliser ghost is inaccessible to burglars and operates quietly without radio signals. It connects with the vehicle's CAN network and requires a unique PIN to allow you to start your car. It also stops hackers from gaining access to the system via diagnostic scans or by tampering with the OBD port on your car. Additionally, the device uses an unique algorithm to detect and deactivate cloned keys.
While it is possible to install Ghost immobilisers yourself however, the process is risky. It must be done by a certified professional. Incorrect installation could cause damage to your car's wiring and render the device ineffective. Additionally the DIY installation could end the warranty on the device and your vehicle.
Ghost users are generally satisfied with their device. They appreciate the added security and peace of mind it brings to their lives. It is also simple to use and discreet in appearance. Most of them are happy with the fact that it is able to secure their vehicle from theft if they lose their keys.
A few customers have reported issues with the device's stop/start feature. This could be due to an improper configuration or a problem that is independent of the Ghost immobiliser. However, these issues are very rare and can be easily resolved by contacting the company that installed the Ghost.
A professional Ghost installation is recommended because the device can be costly to repair or replace if it's damaged by an experienced hacker. The best way to avoid this is to ensure the installer is certified and has a great reputation. A reputable and verified installer will have a solid commitment to customer satisfaction and stand behind the quality of their work.
Cost of insurance
Ghost immobilisers stop thieves from starting your vehicle. It works by connecting with the car's data network CAN and generating a unique code sequence. This sequence must be entered prior to starting the engine. The device is able to be moved between vehicles and does not require power cables or batteries. It can be used in conjunction with the traditional car alarm system or as an alternative. It can be programmed to work on a new car if you intend to trade or sell your car in the future.
The autowatch ghost is a hidden, covert immobiliser that is easy to install and will not be recognized by thieves. It uses the buttons on your car to input your PIN code. This makes it difficult for thieves to to detect its presence. It is also extremely durable and weatherproof, so it can withstand a variety of environmental conditions. This makes it perfect for classic, sports and luxury vehicles that require battery isolation when parked for long periods of time.
This cutting-edge technology stops signal copying and door lock pick set bypasses by connecting directly with the car's CAN network. It is a TASSA-verified immobiliser, which is regarded by insurance providers as a deterrent to theft. It also has an innovative feature called Stealth Active, which is undetected by key cloning equipment.
Contrary to other car immobilisers the Autowatch ghost is a low-maintenance device that does not require wiring, which means it won't interfere with your car's electrical system, or the aesthetics of your. Installation is simple and can be done by a professional technician. However, it's important to keep in mind that the device may be damaged if it's installed incorrectly. This is the reason it's advisable to hire an experienced installer to ensure that your vehicle is protected.
While many people opt to install a ghost ignition system themselves but it's best to seek professional help if you're considering this option. Doing it yourself could lead to a myriad of issues, including tripping wires and causing electrical problems. Incorrect placement can also make the device useless, or even visible to thieves. It is therefore recommended to incorporate an immobiliser with other security measures like GPS tracking or alarm systems. This will increase your chances of obtaining a lower insurance premium.