Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a straightforward and effective way to secure your vehicle from theft. It connects directly to the CAN network of your vehicle and is almost undetectable.
Locate a source of constant power as well as a point of grounding. The wires should be properly insulated to avoid electrical shorts.
Preventing theft
The Ghost 2 Immobiliser utilizes a unique PIN code sequence created using the electronic buttons on your steering wheel or centre console to ensure that only you are able to start your car. This means that even if thieves manage to copy your keys or hack into your car's systems, they won't be able to get the vehicle to move. It's also quiet and invisible to anyone who attempts to use it therefore you can be sure that nobody will ever realize that you've added an additional layer of security.
It also assists in preventing theft as it can shut down your car's engine even if a thief is able to gain access. This is accomplished by using a secondary device called the Shadow which is connected to your car's CAN data network and does not communicate over radio frequency, which makes it difficult for thieves to track or alter. The Shadow can also be connected to the vehicle's tracking/paging system allowing you to monitor its movements. It also has an output which can be used to activate a siren when someone tries to take it.
It is crucial to work in a well-lit space when working with wiring, to aid in identifying the correct wires and avoid any short circuits or accidental disconnections. Making sure you double-check and test the connections is essential and also insulating the wiring to protect from the elements. It is also recommended to use cable ties to bundle and secure the wires, which improves their appearance and decrease the possibility of them getting ripped off during the operation of a vehicle.
It is also a good idea to mark the CAN H and CAN L wires with pieces of tape or labels, since not knowing where they are could cause a power surge which damages the immobiliser. It is also recommended to test the identified power source and grounding location with a multimeter to make sure that they are providing a steady 12V power supply and a stable grounding.
Easy to use
Ghost immobilisers are an excellent method to safeguard your vehicle from theft. It protects against key cloning ECU swapping and other security threats and can be used with an iPhone application for simple management and monitoring. The app will notify you in the event that your vehicle has been altered. The app can also assist you to locate your vehicle in the event it is stolen.
The Ghost immobiliser is discreet and does not require any special equipment to function. It's linked to your vehicle's CAN system and is programmed with a unique PIN code that you can choose. You can activate it by using the series buttons on your dashboard, steering wheel, or the WeCar application. The unique code has to be entered before the engine can start, so thieves cannot simply turn off your car and drive away.
Installing an immobiliser Ghost is a simple process. However, it's crucial to follow the instructions to ensure that the systems of your vehicle are seamlessly integrated. The first step is to disconnect the battery. This will stop airbags from accidentally deployment and ensure security. It's also important to work in a well-lit space to make precise connections and avoid committing mistakes. To ensure a solid, secure connection, it is essential to use only high-quality connectors or a proper soldering.
The CAN H wire as well as the CAN L wire are required to connect your Ghost immobiliser with your vehicle's wiring. With a wiring diagram for your vehicle, identify these wires and locate a suitable spot to connect them. Label these wires with labels or tape to make them easier to identify during installation.
It's a good idea test your immobiliser once the connections have been made to ensure that it functions correctly. Also, you should test the Transport Mode which disables the Ghost System and lets you temporarily disable your security functions. This is particularly useful for scenarios like vehicle transportation or servicing. This feature is particularly useful if your vehicle is older and requires the battery to be isolated during service.
Low-profile
Ghost immobilisers are the ideal way to stop theft in keyless entry vehicles and vans. It works by intercepting the remote control signal of your vehicle and constructing a barrier that thieves cannot get through it without the proper PIN code. It's a safe and discreet way to protect your vehicle and insurance companies recommend it to cut down on the cost of your monthly premiums. It's a low-profile system that's hidden in the buttons of your car and doesn't have LED indicators, which makes it virtually undetectable to thieves.
The Ghost immobiliser, unlike most other security systems is connected to the CAN data network of your vehicle, not a remote control. This means that thieves won't be able to detect or disable the device by wire cutting and is impervious to tampering. ghost immobiliser for sale makes it more difficult for thieves to take your vehicle. It's also an excellent alternative for older vehicles that do not have a keyless entry system.
Installing a ghost immobiliser is easy if you have the right equipment and materials. You'll require basic hand tools, a multimeter to check the electrical value, and insulation tape or cable ties to ensure your connections are secure and well-insulated. You should also disconnect your battery prior to starting, and make sure that the wiring is neatly connected and insulated to protect tampering from thieves.
You can request an authorised shop to install your immobiliser, if you are not comfortable doing it yourself. They'll take care of everything from the initial inspection to installing the device, and they'll offer a guarantee if something goes wrong. They'll be in a position to answer any questions you may have regarding the immobiliser and assist you in deciding whether or not it is the right option for your car.
The Autowatch Ghost 2 smart immobiliser integrates directly into your car's electronic control unit. This protects against hacking and key cloning attacks that are typical in modern vehicles. It's TASSA verified and offers superior protection against theft and theft, so you can be sure that your vehicle is secure when you drive it.
TASSA verified
The Ghost immobiliser system is one of the most effective methods to protect your vehicle from theft. It connects to the car's CAN data network and uses it to prevent the engine from beginning without a unique PIN code. The system cannot be spotted by thieves and is an excellent alternative to car alarms. You can change the PIN code at any time and only you will know it, ensuring the security of your vehicle.
A TASSA certified installer will complete the installation of Ghost Ghost system in a couple of hours at your home or place of work. They will also give you owner's guides, installation documents and a complimentary emergency card. They will also give you a a thorough demonstration of the device and make sure that you are happy with the service before they leave.
The Ghost, unlike other immobilisers, is able to connect directly to the CAN data network of your vehicle. It can be installed without having to cut any wires. It's also extremely quiet, making it very difficult to detect by thieves. The system is programmed with a a unique PIN that is changeable and you enter using existing buttons on your dashboard or steering wheel. This prevents anyone from starting your vehicle even if they have the key fob.
If you're ready to install an immobiliser for a ghost 2, you should begin by disconnecting the battery. This will avoid the possibility of accidental airbag deployments and short circuits. Once the battery has been disconnected it is recommended to follow the steps in the user's manual to connect the immobiliser. Use online resources to find more information specific to your model.
Once you have completed the process, check the immobiliser to make sure that it functions properly. You can do this by entering the PIN code, then trying to start the vehicle. Then, you should conduct regular checks on the immobiliser to ensure it's working correctly. This will allow you to spot any issues early and fix them swiftly.